174967 MANUAL GEAR LEVER BUSHING - 360/F430
174967 MANUAL GEAR LEVER BUSHING - 360/F430
MANUAL GEAR LEVER BUSHING (6-SPEED MODELS)
Once again, the wizards at Hill Engineering have responded to a notorious 360 failure... the gear lever bushing. The original ones from Ferrari are made from a low-grade plastic that eventually breaks -- rendering the shift lever "sloppy" at best, and inoperable at worst!
This improved bushing from Hill Engineering is made from billet aluminium, and will forever eliminate the risk of a broken shift lever mechanism.
Need some installation instructions? Here's what we were sent by a satisfied customer! 174967 Installation Instructions
/ Each
This item is used in the following applications:
CarVehicle | *Qty*Quantity | TblTable | LocLocation | Where Used |
---|---|---|---|---|
360 Modena | 1 | 37 | 6 | OUTSIDE GEARBOX CONTROLS |
360 Spider | 1 | 37 | 6 | OUTSIDE GEARBOX CONTROLS |
F430 (05-08) | 1 | 33 | 6 | OUTSIDE GEARBOX CONTROLS |
F430 Spider | 1 | 33 | 6 | OUTSIDE GEARBOX CONTROLS |
Contact us about use in cars not listed above.
* Quantity shown indicates the number of pieces used in the diagram.