205396 END OF STROKE STUD - 360
205396 END OF STROKE STUD - 360
END OF STROKE STUD - 360 -Valid from engine Nr. 81310
We strongly recommend the use of support bracket 201282 when using these pins on early 360M or Spider vehicles.
This is a remanufactured item from Hill Engineering using a stronger tensile steel than the original Ferrari bolt. We strongly recommend using two new pins whenever changing a 360 clutch or thrust bearing. Please note that this pin is slightly longer than the old 171458 pin allowing the release bearing to travel further on the flange. These pins can be removed using tool 95973048
These are only sold as a pair. Your order of this item from Ricambi America will provide two pins.
/ pair
This item is used in the following applications:
CarVehicle | *Qty*Quantity | TblTable | LocLocation | Where Used |
---|---|---|---|---|
360 Challenge | 2 | 22 | 20 | CLUTCH AND CONTROLS |
360 Modena | 2 | 28 | 20 | CLUTCH AND CONTROLS -VALID FOR F1- |
360 Spider | 2 | 28 | 20 | CLUTCH AND CONTROLS -VALID FOR F1- |
Challenge Stradale | 2 | 26 | 20 | CLUTCH AND CONTROLS |
ENZO | 2 | 21 | 18 | CLUTCH CONTROLS |
Contact us about use in cars not listed above.
* Quantity shown indicates the number of pieces used in the diagram.