The Amazing Ferrari Window Accelerator Module



 

Ricambi America is proud to carry these unique Ferrari Window Accelerator Modules.   If your car is like most middle-aged Ferraris (mid 1980's to mid 1990's), you're probably frustrated with the slow moving windows that crawl upward and sometimes actually require manual "pulling" to completely close them.   In some cases, the problem is rock-hard grease in the window tracks, in other cases the problem is broken wires in the door connection.  However, in almost all cases, there is a significant problem of growing electrical resistance as the window winds up.   These modules solve the problem by creating a new ground circuit in the window. 
 
They are completely harmless for your car and require no additional power to operate.  Installation takes simple hand tools, and the results are frankly, quite amazing.   We have installed these on our personal 348, and now experience perfectly satisfactory windows that close quickly and completely!

The pictorial below shows how installation is performed:

 

----Above---   Middle trim and speaker grill/carpet removed showing the speaker recess and the wiring pulled
out that feeds the window motor from the door switches


----Above---   These are the insulating covers that house the connections. These need to be connected to
directly with the 2 power wires of the module




----Above---   Cut short the Ferrari wiring and shortened the cables by about 10 inches, this further improves and
lowers the resistance. Then, reconnect everything together with the crimps provided. Shorter
cables will only improve current flow!


----Above---   You can see here the main earth wire (in blue) is connected neatly to one of the door chassis bolts
and is very convenient for location of the module




Finally the connections are taped up to eliminate corrosion, then cable tied and neatly tucked
down below the speaker.