123360 SLEEVE FOR BUSH
123360 SLEEVE FOR BUSH
Hill Engineering's Clutch release bearing flange - 123360 for:
288GTO, F40 & Testarossa
Made to Hill Engineering's exacting standards
Comes complete with 2 x #65928500 at no extra cost.
Part
123360
$868.00
/ Each
This item is used in the following applications:
CarVehicle | *Qty*Quantity | TblTable | LocLocation | Where Used |
---|---|---|---|---|
288 GTO | 1 | 35 | ||
F40 | 1 | 29 | 42 | CLUTCH AND CONTROL |
Testarossa (1987) | 1 | 27 | 17 | CLUTCH AND CONTROLS |
Contact us about use in cars not listed above.
* Quantity shown indicates the number of pieces used in the diagram.