181599 HOSE FROM PUMP TO PLENUM - 456, 550, 575, 612
181599 HOSE FROM PUMP TO PLENUM - 456, 550, 575, 612
RUBBER HOSE FOR WATER PUMP
It is difficult to understate the importance of this rubber hose on the 456, 550, 575M, and 612 vehicles --- it is the primary coolant line from the back of the waterpump through the valley of the intake plenum. The original Ferrari version of this coolant hose was a standard rubber formulation which has a rather limited lifespan given its operating environment. The revised version of this hose, a genuine Ferrari item is multi-layer silicone and significantly more durable.
Access to this hose is somewhat cumbersome, as the entire intake assembly of must be removed -- so plan to change this hose during timing belt service intervals or whenever the waterpump is being serviced. We recommend additional replacement of gaskets 2 x 324050 (intake) and 2 x 154562 (on 456, 550M) or 2 x 181064 (on 575M, 612).
/ Each
This item is used in the following applications:
CarVehicle | *Qty*Quantity | TblTable | LocLocation | Where Used |
---|---|---|---|---|
456GT | 1 | 25 | 45 | WATER PUMP |
456M | 1 | 28 | 45 | WATER PUMP |
550 Maranello | 1 | 28 | 45 | WATER PUMP |
575M | 1 | 27 | 45 | WATER PUMP |
575M Superamerica | 1 | 27 | 45 | WATER PUMP |
612 Scaglietti | 1 | 26 | 40 | WATER PUMP |
Contact us about use in cars not listed above.
* Quantity shown indicates the number of pieces used in the diagram.